As an Amazon Associate I earn from qualifying purchases.
1. HGLTECH #ad
HGLRC Zeus Mini F722 M3 2-6S F7 Flight Controller MPU6000 20x20mm FC Built-in OSD BEC Black Box for Betaflight Emuflight FPV Racing Drone RC Quadcopter #adHGLTECH #ad
- Quickly connect DJI. Maximum bec 9v/2a and beC 5V/3A output. Integrated barometer and 16M black box. What you get:1x zeus f722 mini flight controller, 5x m3 to m2 stack mount adapter, 5x m3 shock absorption（red）, 1x dji air uniT PORT CABLE 90mm, 1x dji air unit port cable 90mm, 1x SH1.
0 8pin 60mm Cable. Easy direct soldering for XM+, NANO receiver.
2. iFlight #ad
IFlight SucceX Mini 45A 2-6S ESC 20x20mm BLHeli_32 DShot150/300/600 4-in-1 Electronic Speed Controller for FPV Drone Racing Part #adiFlight #ad
- 48mhz runs blheli 32. X firmware, Onboard current sensor. Supports dshot150/300/600/MultiShot/OneShot etc. 6 layers single-board stacking PCB board, 4x STM32G071 MCU processers. 2-6s lipo battery compatible, 45A per channel, 55A burst. Mounting holes: 20*20mm φ3mm with Grommets φ2mm.
3. nidici #ad
NIDICI NDC-E Mini 35A 2-6S BLHeli_S 4in1 ESC 20x20mm Support DShot150 DShot300 DShot600 for FPV Racing Drone #adnidici #ad
- 3. Support dshot150/300/6002. Reasonable layout, 20*20mm/φ3mm. 1. Nidici new blheli esc 35a 4in1 esc, adopt 6 layers 2OZ copper PCB, better operating load capacity. 4. Top material, optimized circuit, with High-performance components, suit for fpv drone racing. 5. Support 2-6s lipo battery.
4. AKK #ad
AKK 35A 8 Bit 4 in 1 20mm x 20mm Brushless ESC Integrated for RC Drone FPV Racing #adAKK #ad
- Supports 2-6S Lipo input. Highly integrated, small size, Built-in ammeter. The input and output cables are made of soft silicone cables, which are very durable, resistant to high temperatures and easy to solder.
Main control chip:STM32F051. Dshot600 readydefault support pwm/oneshot42 ;125/muLTISHOT/DSHOT150;300 .
5. HAKRC #ad
Hakrc 20x20mm 15A Blheli_S BB2 2-4S Dshot 4 in 1 ESC for RC FPV Racing Drone #adHAKRC #ad
- The code supports regular 1-2ms pulse width input, as well as Oneshot125 125-250us, Oneshot42 41. 7-83. 3us and multishot 5-25us and D-shot. Blheli_s is designed for superior performance in FPV Racing, and uses hardware generated motor pwm for smooth throttle response and silent operation.
The input signal is automatically detected by the ESC upon power up.
There are tune-able parameters that can make the code run well even in the most demanding situations, although default settings will work. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling. The code supports features to prevent sync loss. All codes use damped light mode.
6. iFlight #ad
IFlight SucceX-E Mini 35A BLHeli_S 4-in-1 ESC 2-6s Electronic Speed Controller Support DSHOT600 for RC Quadcopter Drone #adiFlight #ad
- The design of succex-e 35a blheli_s dshot600 4in1 esc based on SucceX ESC, was designed to give your motors smooth power with great stability and durability, more affordable. Rational layout design with extended solder pads ensures easy builds, fixes or adjustments.
Standard 20*20mm/Φ3mm mounting holes; Vibration and shocks can be perfectly avoided by adding dampers. 6s esc support dshot up to 600; support 2-6S Lipo Input. 35a per channel, 40A burst.
7. HGLRC #ad
HGLRC Zeus Mini F722 3S- 6S for DJI 20X20mm M3 Flight Controller FC with 16M Black Box for FPV Racing Drone RC Quadcopters Multirotors #adHGLRC #ad
- We are the original hglrc manufactory, if there are any question or need help, pls feel free to contact us, we will always here help you out within 24 hours . Zeus f722 mini fc, operating at a higher frequency, making everything run smoothly.
Installing hole : 20x20mm m2 cpu : STM32F722 RET6. Integrated barometer and 16M black box, built-in Betaflight OSD to adjust PID. Easy direct soldering for tbs nano vtx, xm+ and TBS CROSSFIRE NANO Receiver. Click the orange Button to Buy Now :. Suitable for mini indoor outdoor racing drone quadcopter. Choose us risk free today.
8. iFlight #ad
IFlight SucceX-E Mini F7 35A 2-6S Flight Stack 20x 20 MPU6000 F7 Mini Flight Controller with Mini 35A BLHeli_S 4in1 ESC for FPV Racing Drone Quadcopter #adiFlight #ad
- When you have any question or problem, please feel free to contact us any time, we will provide the best service! Support analog fpv camera plug and play, support frsky or TBS receiver plug and play.
F7 mini fc with high-performance CPU processor, smooth control and faster response. Iflight succex-e mini f7 flight controller, support Vista HD Plug-and-Play. No need to solder tiny wires. Succex-e mini f7 35a stack mounting hole: 20*20mm，φ3mm hole.
9. iFlight #ad
IFlight SucceX-E Mini F7 V1.0 MPU6000 Flight Controller 20x20mm F7 FC Built-in OSD Barometer LC Filter 8MB Black Box Support Vista HD for FPV Racing Drone Quadcopter #adiFlight #ad
- 2. This f7 v1. 0 support all receiver such as frsky receiver, tbs receiverdirectly plug to it, no need to solder. 5. Built with bat, +5v, start indicator light, 3.3v, it will indicate the current working status. 1. Succex-e mini f7 v1.
0 flight controller support Vista HD VTX plug directly. 3. Succex-e mini f7 v1. 0 fc support analog vtx and analog camera directly plug, no need solder. 4. This new f7 flight controller built with LC filter, this LC filter reduces DC-DC switcher supply ripple and helps clean noisy power from a battery.
10. Hobbywing #ad
38010200 Max10 SCT ESC Combo with 3660SL 3200kV Sensorless Motor #adHobbywing #ad
- Esc: fan: yes; programing via set button, Wi-Fi module, LCD program box, LED program box, fan/program port. Esc: size: 49.
0x39. 5x34. 7mm; weight: 105g; kv rating/t count: 2s lipo:kv≤6000;3s lipo:kv≤4000;4S LiPo:KV≤300036XX Series of Motors. Esc: 1/10th scale sensor less brushless; cont. Peak current: 120a/830a; input: 2-4s lipo/6-12 cells NiMH; BEC output: switch mode: 6V/7.
4v, 4a. Motor: pole count: 4; kv rating: 3200; lipo cells: 2-3s; o. D. Mm: 361. 417in; length mm: 602. 36in; shaft Diameter mm: 50196in; weight g: 2629. 24oz. Applications: 1/10thShort-course Truck/truck/monster truck4wd.