Top 9 IFlight SucceX Micro F4 V2.1 – Hobby RC Quadcopters & Multirotors

As an Amazon Associate I earn from qualifying purchases.

1. iFlight

 #ad

IFlight SucceX Micro F4 V2.1 Flight Controller Stack 2-4S F4 FC + 4 in 1 15A ESC BLHeli_S + 5.8G Pit/25/100/200mW Transmitter VTX for FPV Micro Racing Drone Quadcopter

#ad
iFlight #ad - 1. 3. Micro f4 flight control has been optimized overall. The soldering pad is semi-extended, save more room but solid. The built-in osd chip helps to monitor the status of the flight data any time, integrated programmable RGB LED port.

Succex 16x16mm micro f4 flight tower is specially designed for Micro FPV race quad micro new compact and concentrated into a three-layer tower structure. 5. Micro 5. 8g pit/25/100/200mw switchable fpv transmitter vtx with irc tramp function helps setting frequency point, power and FC parameter directly, use Pit Mode allows you to power up safely without the risk of knocking other pilots out of the air.

2. The micro fc, esc, optimized internal circuitry, and VTX neatly stack together, highly integrated with all the latest features, with pinned interconnects that make your build easy to assemble and cleaner looking.4. 15a 4 in 1 micro esc dshot600 blheli_s 2-4s esc support dshot, Oneshot, Multishot, etc.
BrandiFlight #ad
ManufactureriFlight #ad
Part Number0

2. iFlight

 #ad

IFlight SucceX Micro F4 V2.1 Flight Controller Stack 16x16mm Mount Hole + iFlight SucceX Micro Force 5.8GHz PIT/25/100/200mW/300mW VTX 16x16mm Mount Hole

#ad
iFlight #ad - The built-in osd chip helps to monitor the status of the flight data any time, integrated programmable RGB LED port. Micro f4 flight control has been optimized overall.

Micro 5. 8g pit/25/100/200mw switchable fpv transmitter vtx and micro Force 5. 8ghz pit/25/100/200mw/300mw VTX. Succex 16x16mm micro f4 flight tower is specially designed for Micro FPV race quad micro new compact and concentrated into a three-layer tower structure. 15a 4 in 1 micro esc dshot600 blheli_s 2-4s esc support dshot, Oneshot, etc. The micro fc, highly integrated with all the latest features, and VTX neatly stack together, esc, optimized internal circuitry, with pinned interconnects that make your build easy to assemble and cleaner looking. The soldering pad is semi-extended, Multishot, save more room but solid.
BrandiFlight #ad

3. iFlight

 #ad

IFlight TurboBee 160rs 4inch 3-4S Toothpick FPV Race Quad Kit Frame+Xing 1404 Motor+SucceX F4+15A 4in1 ESC+Whoop VTX+Micro Camera

#ad
iFlight #ad - 5. Pack list:1* frame, 1*succex micro f4 v1. 5 fc, 4*xing 1404 3800kv motor, 1* iflight ufl antenna, 1*succex whoop force vtx, 1*SucceX Micro 15A V2.1 esc, 1* turbo eos v2 camera for caddx. 4*pairs nazgul 4030 propeller, 1* screws bag. 2. Turbobee 160rs is designed and born for micro FPV racing. 3. This 4inch drone frame adopt long X type, the iconic shaft type of the racing drone, for more flexible spinning. 4. The speed of the micro drone flying is as good as the big drone due to a strong power system. 1. Turbobee 160rs carbon fiber main plate with compact canopy design, super clean.
BrandiFlight #ad
ManufactureriFlight #ad
Part Number0

4. iFlight

 #ad

IFlight SucceX-D F4 Flight Controller 20A ESC AIO Whoop Board MPU6000 for Tiny Whoop Cinewhoop FPV Racing Drone Quadcopter Work with FPV Air Unit

#ad
iFlight #ad - 2. Plug and play for dji HD FPV system, no need to solder tiny wires. 3. Mounting pattern: 25. 5*25. 5mm/φ3mm, with micro usb connector. 5. If you like to make this board work with other radio transmitter, please check our wiring diagram carefully. 1. Succex-d f4 aio board is the superb board layout allowing for easy and clean builds. 4. Input support: 2-4s, BEC output: 5V 2A.
BrandiFlight #ad
ManufactureriFlight #ad
Part Number0

5. iFlight

 #ad

IFlight SucceX F4 1S 5A AIO Whoop Board MPU6000 with VTX for 1s Micro Whoop Drone

#ad
iFlight #ad - We will provide the best customer service, we hope you can contact us when there is any question in the first time, we will provide best service to solve your issue or problem. It suit for alpha a65, newbeedrone 65, BETA Meteor 65 whoop drone. The f4 aio board come with VTX, easy for you to mount on your drone. Iflight succex f4 1s 5a f4 whoop aio board, super light weight only 5. 5g. Blheli-s electronic speed controller, 5a continuous  current.
BrandiFlight #ad
ManufactureriFlight #ad
Part Number0

6. iFlight

 #ad

IFlight SucceX 50A 2-6s ESC 32bit BLHeli 32 4-in-1 ESC with Telemetry Pad Built in Current Sensor DSHOT600 for FPV Racing Drone Quadcopter

#ad
iFlight #ad - The stm32f051 is combined with high-performance 3-in-1 driver, 4oz 1. 6mm thick power board09mm copper ratio, outbreak faster speed; with 6-layer PCB board, better operating load capacity.

Succex 50a 32bit bl dshot1200 4in1 esc was designed to give your motors smooth power with great stability and durability. Tdk mlcc low esr ceramic capacitors and ntmfs5C430NL MOSFET that provides high efficiency and better heat dissipation. Standard 305*305 Φ3mm mounting holes; vibration and shocks can be perfectly avoided by adding dampers; Rational layout design with extended solder pads ensures easy builds, fixes or adjustments. 6s esc support dshot up to 1200, multishot, support: dshot150/300/600/1200, OneShot; support 2-6S Lipo Input.
BrandiFlight #ad
ManufactureriFlight #ad
Part NumberSucceX

7. iFlight

 #ad

IFlight SucceX-D F7 TwinG Dual ICM20689 Flight Controller F7 FC Built-in OSD BEC Current Sensor Black Box for DJI FPV Air Unit HD Version…

#ad
iFlight #ad - Fc board add the popular and reliable USB Type-C instead of Micro USB which makes connection easily. The f7 flight controller hd version is designed to work seamlessly for DJI’s new HD FPV system.

Built-in osd, optimized circuit design, high-performance hardware, double 5V/2.5a, 9v/2. 5a bec, further guarantees powerful performance of flight controller. This flight controller is ready for anything with 5 uarts, 8 motor outputs, Dual ICM20689 gyro, 32mb blackbox and a powerful F7 processor to run it all. F7 fc included a connector specifically for DJI air unit, so installation should be a breeze.
BrandiFlight #ad
ManufactureriFlight #ad
Weight0.06 Pounds
Part NumberSucceX-D

8. iFlight

 #ad

IFlight SucceX-E Mini F7 V1.0 MPU6000 Flight Controller 20x20mm F7 FC Built-in OSD LC Filter 8MB Black Box Support Vista HD for FPV Racing Drone Quadcopter

#ad
iFlight #ad - 5. Built with bat, 3. 3v, +5v, start indicator light, it will indicate the current working status.4. This new f7 flight controller built with LC filter, this LC filter reduces DC-DC switcher supply ripple and helps clean noisy power from a battery. 1. Succex-e mini f7 v1. 0 flight controller support Vista HD VTX plug directly. 3. Succex-e mini f7 v1. 0 fc support analog vtx and analog camera directly plug, no need solder. 2. This f7 v1. 0 support all receiver such as frsky receiver, tbs receiverdirectly plug to it, no need to solder.
BrandiFlight #ad
ManufactureriFlight #ad
Part Number0
Model0

9. iFlight

 #ad

IFlight XT30/ XT60 Smoke Stopper with Alarm Buzzer,Short-Circuit Protection Safety Inspecting for 2-6S RC Quad FPV Racing Drone

#ad
iFlight #ad - 3. Xt30 & xt60 input and output, suit for FPV drone with XT30 or XT60 connector. 1. Iflight xt30/ xt60 smoke stopper, Every quad drone owner should have one. 2. Input voltage: 7-25v, this smoke stopper can help avoid damage when you power on your 2-6s quad drone for the first time. 4. The led indicator turns solid green in normal situation, The LED indicator turns off and starts beeping in abnormal situation. 5. Please email us when you have any question, we will provide you best customer service.
BrandiFlight #ad
ManufactureriFlight #ad
Part Number0

Tags: